Use a Pneumatic Forklift
You could normally find pneumatic forklifts in shipping and warehouse operations. Also known as pallet trucks or pump trucks, they are utilized to transport things and supplies around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight contains a pump that can lift the forks off the ground. A pallet truck is intended to be operated by one individual.
Pallet trucks should be operated with care in order to prevent loss of control while raising heavy loads. Machine must be inspected before operating. Clear the wheels area of any obstructions. Make certain that the handle turns smoothly. The pallet must be stacked carefully to guarantee that nothing will fall off during transportation.
To be able to lower the forks and release air in the pump, squeeze the lever situated on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the pallet slots. The forks must be in the middle to be able to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not lift the pallet very high or the forklift can unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is really not safe to push the pallet ahead of you as the thrust can cause it to go out of control. Take turns slowly and don't attempt to stop suddenly. Gradually stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.