Used Cushion Tire Forklift Maryland - Forklift trucks are commonly classified by the kind of work they complete as well as the kind of tire they use. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
When considering the benefits and drawbacks of cushion tires in forklift uses, it is important to discuss the benefits and drawbacks of the other available forklift tire option: the pneumatic tire. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are made up of either smooth or treaded solid rubber and are designed around a metal ring or baseband. These types of forklift tires are easier to maintain and less expensive to manufacture. Cushion tires are designed for smooth surface applications such as work that takes place mostly indoors or around loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tires forklifts are commonly used for organizing inventory, moving items to and from different loading docks, unloading shipments and similar applications.
Pneumatic Tires
Pneumatic tires have two categorizations as either solid resilient pneumatic or standard air pneumatic. They are popular for rough terrain applications and uneven surfaces.
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. Solid resilient pneumatic forklifts are a better option in areas that may have objects which could puncture a standard air pneumatic, such as junkyards, lumber yards and the like which may have sharp metal objects.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. Axles and tires are specific to a forklift frame and lifting capacity. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are popular for a variety of job sites. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This compact design facilitates easier clearance through doorways and overhead obstacle avoidance. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. To combat this issue, the cushion tire forklift can be fitted with traction tires on the front. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the top advantages of the cushion forklifts is their tight turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Similar to solid pneumatics, air pneumatics work well outdoors on asphalt, in gravel and in yards. The main issue with air pneumatic tires is their ability to become gouged or punctured. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. It is possible to foam fill the pneumatic forklift tires for a smoother ride. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Foam filling is also used to help prevent flat tires. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
Both cushion tire and pneumatic tire forklifts offer similar load capacities. Some electric powered cushion tire forklifts do have lift limits. Pneumatic tire and cushion tire forklifts are available in practically any load capacity. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
